Xylem Lab 850, starting from serial number 09470315 Bedienungsanleitung PDF herunterladen (Seite 34)

Operation Lab 850

ba75890e01 11/2009

Switching off the

automatic storing

function

You can terminate the automatic storing function in the following ways:

z set the storage interval (Int.1) to OFF, or

z switch the meter off and then on again.

4 Confirm with <OK>.

Ident, the entry of the ID number is displayed.

5 Set the required ID number with <▲><▼>.

6 Confirm with <OK>.

The meter switches to the measured value display and starts

the measuring and storing procedure.

AutoStore flashes on the display.

7 As soon as all of the 800 memory locations are occupied,

AutoStore is terminated (Int.1 = OFF).

If there are not enough memory locations available for your

measurements:

– Output and backup the data memory (see page 35) and

– clear the memory (see page 36).

Ident

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 72 73

Keine Kommentare

Xylem Lab 850, starting from serial number 09470315 Bedienungsanleitung Seite 34