Xylem MULTI 3400i pH/Cond MULTI-PARAMETER METERS Bedienungsanleitung PDF herunterladen (Seite 17)

pH/Cond 3400i Operation

Temperature measure-

ment in pH measure-

ments

You can perform pH measurements with or without a temperature sen-

sor as well as with the temperature sensor of a conductivity measuring

cell. The measuring instrument recognizes which sensors are connect-

ed and automatically switches to the correct mode for the temperature

measurement.

The following cases are distinguishable.

* If you do not wish that, you can:

– either disconnect the 2nd sensor and use the manual temperature

input or

– use an electrode with a temperature sensor.

If a temperature sensor is connected, it is indicated on the display by

TP.

Note

When calibrating without a temperature sensor (no TP display indicator

displayed), enter the current temperature of the respective buffer solu-

tion manually using the <▲> <▼> keys while keeping the <RUN/EN-

TER> key depressed.

Temperature sensor Display Mode

pH Cond

yes - TP Automatic with

pH temperature sensor

yes yes TP

- - Manual

-yesTP

flashes

The temperature value of the

2nd sensor (Cond) in the

same test sample is used for

the pH measurement*

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 82 83

Keine Kommentare

Xylem MULTI 3400i pH/Cond MULTI-PARAMETER METERS Bedienungsanleitung Seite 17