Xylem MultiLab 4010-2 Bedienungsanleitung PDF herunterladen (Seite 67)

MultiLab 4010-2 Settings

ba76142e01 05/2013 67

9.3.2 Enter Sensor Cap coefficients

9.3.3 Saturation local

Irrespective of the height or air pressure, the calibration value is set to 100%.

Saturation local is ideal for EU compliance.

When Saturation local is enabled, an L will appear next to D.O.% on the

display.

Calibration /

Sensor Cap coeffici

ents

...

Enter the cap coefficients here after

exchanging the sensor cap.

For details, see section 9.3.2 E

NTER

ENSOR CAP COEFFICIENTS, page 67

Salinity 0.0 ... 70.0 Salinity or salinity equivalent for the

salt content correction.

This menu item is only available if the

automatic salt content correction is

switched off and the manual salt con-

tent correction is switched on.

Resolution 0.1

Set a high or low resolution.

The setting of the resolution is sepa-

rately stored for each measured

parameter.

Saturation local on

off

Saturation local is a procedure that

takes the local air pressure into

account for each saturation measure-

ment.

For details, see section 9.3.3

ATURATION LOCAL, page 67.

Reset - Resets all sensor settings to the deliv-

ery condition (see section 9.6.1 R

ESET-

TING THE MEASUREMENT SETTINGS,

page 73).

The values of the coefficients are provided with the sensor cap.

1. Change the digit of the highlighted position with <><>.

2. Go to the next position with <><>.

3. Confirm with<ENTER> when a coefficient is completely entered.

Menu item Possible

setting

Explanation

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 111 112

Kommentare zu diesen Handbüchern

Keine Kommentare

Xylem MultiLab 4010-2 Bedienungsanleitung Seite 67

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Xylem MultiLab 4010-2