Xylem ProLab 3000 Bedienungsanleitung PDF herunterladen (Seite 27)

ProLab 3000 Commissioning

ba75645e03 12/2012

3.6.1 Connecting an ID sensor

ID sensor with

temperature sensor

ID sensor without

temperature sensor

1 Connect the temperature sensor of the ID sensor to the socket.

2 Connect the ID sensor to the socket of the meter.

The sensor is automatically assigned.

The channel to which is was assigned shows the measurement

data of the sensor.

1 Connect the ID sensor to the socket of the meter.

As soon as the meter has recognized the ID sensor, the Auto-

matic sensor recognition window appears with the sensor

name and series number.

2 Assign the sensor that was recognized to a channel with pH/U/

ISE Probe 1 or pH/U/ISE Probe 2.

As soon as a sensor was assigned to a channel, the assign-

ment is completed and the Automatic sensor recognition is

closed again.

Note

The manual assignment of a sensor to a channel is stored in the

meter. The next time the meter is switched on while ID sensors are

connected, the last assignment of the sensor is displayed and can be

confirmed with <OK>.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 201 202

Keine Kommentare

Xylem ProLab 3000 Bedienungsanleitung Seite 27